5x100 to 5x112 | 57.1/57.1mm US Made Hubcentric Wheel Adapters 14x1.5 stud Kit Ball Seat (MULTIPLE APPLICATIONS)x 2pcs.
5x100 to 5112 | 57.1/57.1mm Adapters 14x1.5 stud Ball seat Lugs
AUDI
80 72' - 86' 4x100 12x1.5B 57.1
4000 73' - 85' 4x100 12x1.5B or 14x1.5B 57.1
COUPE 80' - 96' 4x100 14x1.5B 57.1
FOX 73' - 79' 4x100 12x1.5B 57.1
CHEVROLET
CHEVETTE 75' - 86' 4x100 12x1.5 57.1
COBALT (4-Lug) 05' - 10' 4x100 12x1.5 57.1
DODGE
ARIES 81' - 86' 4x100 12x1.5 57.1
CHARGER 2.2 82' - 84' 4x100 12x1.5 57.1
DAYTONA 82' - 84' 4x100 12x1.5 57.1
NEON 94' - 06' 4x100 OR 5x100 12x1.5 57.1
RAMPAGE 78' - 85' 4x100 12x1.5 57.1
PLYMOUTH
NEON (4-LUG) 95' - 00' 4x100 12x1.5 57.1
PONTIAC
G5 (4-LUG) 07' - 09' 4x100 12x1.5 57.1
SATURN
ION 03' - 07' 4x100 12x1.5 57.1
SC SERIES 91' - 02' 4x100 12x1.5 57.1
VOLKSWAGEN
CABRIO 95' - 03' 4x100 12x1.5B 57.1
DASHER 76' - 84' 4x100 12x1.5B 57.1
GOLF (4-LUG) 76' - 98' 4x100 12x1.5B 57.1
GTI 76' - 84' 4x100 12x1.5B 57.1
JETTA (4-LUG) 76' - 98' 4x100 12x1.5B 57.1
PASSAT (4-LUG) 90' - 97' 4x100 12x1.5B 57.1
PICK-UP 76' - 84' 4x100 12x1.5B 57.1
RABBIT 76' - 84' 4x100 12x1.5B 57.1
SCIROCCO 76' - 84' 4x100 12x1.5B 57.1
US Made Custom Billet Wheel Adapters
NO RETURN NO REFUND
Because these are made with a lip on the outside for the wheel it makes them a custom combination and Not Returnable, Be Sure of your measurements before purchase.
The Fitment Guide is Incomplete if you are unsure about anything, please ask before you buy!
Part # = USA-5100-5112A9HWC57.1/57.1Rad
Vehicle Bolt Pattern = 5x100
Wheel Bolt Pattern = 5x112
Adapter Center Bore = 57.1mm
Wheel Hub Ring = 57.1mm
Thickness = Variable
Adapter Lug Seat = Radius / Ball like factory VW or Mercedes but there is only three-quarter inch clearance for the head so the top of the bolt may need to be ground down to prevent contact with the back of the wheel. (do not use factory bolts with Conical seat)
Adapter Studs = 14x1.5
Also included
14x1.5 Ball Seat Chrome Lugs Included
Thickness = 1"
Quantity = 4
Need Help?
eBay no longer allows our phone number to be displayed.
If you have any questions, please message us and get the answers before your purchase.
The Following Important Information Applies to Your Purchase Whether You Read It or Not
It is your responsibility to ensure that the written description which includes the bolt pattern of the vehicle, bolt pattern of the wheel, center bore and stud / lug nut size are all correct for your application.
If you are not sure about anything please ask.
We are available with professional advice.
8-4 PST M-F
USAdapters
Installation
Installation is of critical importance with wheel adapters.
Professional installation is strongly recommended.
Slip fit the adapter on the wheel and the vehicle before you bolt anything on to ensure that you have proper fitment.
Custom adapters are not returnable.
Mating surfaces must be clean and free of rust and obstructions allowing for the adapter to sit flat on the rotor, and the wheel flat on the face of the adapter.
Make Sure the lug nuts or studs from the vehicle do not touch the back of the wheel.
Torque by hand, do not use impact gun for installation.
Improper Installation Voids All Warranties.
Bolt Patterns
Bolt patterns must be correct, if you are not sure, please get help.
The bolt pattern of the vehicle comes first in the listing and the wheel bolt pattern is listed after the word "to".
There is no such thing as a universal wheel, it is what people call wheels that have two bolt patterns, but there is a possibility of 10 or more.
3, 5 and 7 lug bolt patterns measure differently than 4, 6, or 8 lug
Vehicle Studs
If the studs on your vehicle are longer than the adapter is thick you may need to trim them down so they do not touch the back of the wheel.
Factory lug nuts are often too big to recess in an adapter so they may need to be replaced.
Studs / Lug Nuts
These wheel adapters require a Ball seat lug nut or bolt.
The lug nuts included will be in the same size as the studs in the adapter unless otherwise requested or advertised above.
Different wheels require different kinds of lug nuts, make sure you get the proper lug nuts for your wheels in the right size to fit the studs in the adapter.
Center Bore
The center hole of the adapter must be large enough to fit over the hub of the vehicle. It can be larger, which is called lug centric, where the conical seat lug nuts center the adapter on the hub.
Hubcentric
Hubcentric refers to an adapter where the center hole of the adapter perfectly fits over the hub sticking out on the vehicle.
Wheel-centric
Wheel centric lip is built into these adapters
Thickness
All adapters are also spacers because they require some thickness to be able to bolt onto the vehicle and then hold the wheel.
The minimum thickness we make is 19 mm a.k.a. 3/4 inch and we go up to 5 inches thick.
Installing Two-Piece Adapters
Pictures
The pictures are of stock adapters and may not look exactly like what you get due to differences in bolt patterns and center bore sizes.
You will receive the item as described in the written description of the listing.
Prices
Our prices are higher than many other sellers with similar products because they are just that, similar products.
The cheap wheel adapters you see are made in China.
We are a US manufacturer based in San Bernardino California where we use US sourced billet aluminum providing the best materials for construction of our wheel adapters.
The US sourced aluminum that we use for construction is superior to that from China and it costs more for labor in the US which is why our wheel adapters cost more.
Authenticity
Beware of unscrupulous sellers of wheel adapters (there are many) who would imply or even straight up lie by saying that their adapters are US-made, but they're Chinese imports, these are truly US-made wheel adapters made by US citizens from US sourced aluminum in our machine shop in San Bernardino California
Warranty
Improper Installation or alteration Voids All Warranties.We offer a limited lifetime warranty on our US-made wheel adapters.
This warranty covers the aluminum construction of the adapter, if it should ever fail we will replace the defective part.
This warranty is limited to part replacement only, user agrees to assume all other responsibility and or liability arising from use of this product.
Wheel studs are a wear part, and are replaceable in the adapter, there are many ways to damage them that have nothing to do with construction so wheel studs are not covered under this warranty, if you need stud replacements we have them available for sale online.
NO Refunds - Exchange Only Buyer pays shipping both ways.
NO Returns
Exchanges
No Exchange
Contact
Please Contact us with ANY questions Before purchase, we can no longer display our phone number in our listings but there is a "contact seller" link at the top right of this page in the box called Seller Information where you can contact us through the message system or find the phone number.
Thank You And Have a Blessed Day